Tail Butt Plugs
Crystal Minx Faux Fur Tail Glass Butt Plug by Crystal Delights
Handcrafted glass plug featuring a faux fur tail.
Crystal Delights brings you this handcrafted in the USA anal plug with a faux fur tail attached to the base. Offering you a choice of faux fur tail colors, this anal plug is also made of the highest quality, properly hardened Borosilicate glass. The smooth plug tip eases insertion for unmatched comfort in anal play with a slender stem leading to a flared base, ensuring the plug is safe, comfortable and enjoyable. Can you really resist the temptation of one of these faux fur tails adding visual enticement to any role playing scenario, or stimulating sensory play, or just for that wilder side?
The Crystal Minx Faux Fur Tails are made from beautiful synthetic fur and they come attached to a silky smooth, hand blown glass plug. The plug is made of Borosilicate glass and has a solid but thin neck and a flanged base for safe anal use. The tails are approximately 17 to 19 inches long.
Like all Crystal Delights products, no two plugs are exactly alike, so you will be the owner of a beautiful and decadent erotic art piece that is as unique as you are, and infinitely more satisfying!
- Made in the USA!
- Smooth Body Safe Borosilicate Glass
- Tear Drop Shaped Bulb
- Flared Base
- High Quality Faux Fur
- Phthalate Free
- Use with either Silicone Based Lubricants or Water Based Lubricants
- Snow Leopard
- Grey Wolf
- Weight-3.4 oz
- Length-3.3 inch
- Insertable Length-2.8"
- Bulb Diameter-1.3"
- Base Diameter-1.7"
- Tail Length-17"-19"
**all specifications are approximate-hand crafted products are never exactly the same**
Borosilicate glass is nonporous so clean up is a breeze. Soap and water work fine, or you can wipe it down with a lint-free towel moistened with peroxide, rubbing alcohol or a 10% bleach solution. Generally speaking you can sterilize Borosilicate glass toys in boiling water or the dishwasher. Boiling is not recommended in this case because that would jeopardize the embedded crystal element.
It is not recommended to put your Borosilicate glass product in the microwave or the freezer. Uneven heating can cause burns and freezing may cause sensitive areas to stick. Also, it can jeopardize the attached faux fur tail.
- Keep your tail in a cool, dry place.
- Avoid getting your tail wet.
- Combing the tail with a soft bristled brush once a week can keep it in good condition.
- Make sure your tail isn’t folded or crushed while stored-this could flatten the fibers.
- Store your tail in a well ventilated area to avoid developing odors.
- Do not iron your tail or expose it to any other source of extreme heat.
- Shaking a tail can quickly remove debris without damaging the faux fur.
DO NOT wash your faux tail with water.
Use a cool, damp cloth or baby wipes to clean your tail. The small amount of water on the cloth or baby wipe shouldn’t be enough to damage the tail. Use the baby wipe or the cloth to wipe the fur in one direction. Once the tail is clean, do not rinse it with water. Allow it to air dry.
As with the natural fur tails, please do not pull on the tail during use, or use the tail as a handle for removal; it could damage the tail and we cannot be responsible for its replacement.
If your fur tail has come unglued use a two-part epoxy. Each tail will have a small black leather ring that can be found where the tail attaches to the base of the plug. A small piece of hide is rolled up and inserted into the ring. Take the glue and insert the long applicator into this rolled piece of hide and squeeze, so that that glue is being released into it. Once the glue has filled this piece, it will begin to spill out the top; allow only a small amount to spill over. Next you will push that bottom part of the tail where you have just applied glue against the base of the plug. Make sure you are lining up the leather circle with the well in the base of the plug. Push this against the base of the plug firmly. You will either need to hold the tail against the plug like this, firmly, until it dries, or if you have clamps of some kind, you can use them to hold the tail in place while it dries.